Home / Shop

2x6 Relay Board

$33.00
2x6 Relay Board
2x6 Relay Board

Home / Shop

2x6 Relay Board

$33.00
Model Number: KK1L2x6
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
Your Price: $33.00
33.000
A one-time price of $33.00 will be added to your order.
6 Left in Stock
Manufacturer: KK1L Contest Gear
Facebook
Email
  • Description

2×6 Relay Board

  • Dimensions: 10.1875″ x 6.5″
  • High quality FR4 double sided 2oz copper, masked, and silk screened both sides
  • Designed to handle 1500W with headroom at reasonable VSWR
  • 50 Ohm stripline RF distribution
  • 12V activated relays
  • 50 Ohm termination on unused antennas to reduce reradiation and unwanted internal coupling
  • Impossible for one radio to transmit directly into another
  • Worst case port to port isolation >61dB!
  • Two sets of six inputs required to select the six ports for each radio
    • For example: 2 x FreqEZ HAT8 or 1 x FreqEZ HAT16

 

As a reminder you will need other components to complete your project. Below are some links to help you. I do my best to get your order to you quickly and update the site of any persistent delay (on vacation or business travel for example). I will respond to your order email with any issues. Don’t hesitate to reach out with questions Contact Me.

Mouser Parts – 2×6 PCB
Mouser Parts – 2×8 PCB
Mouser Parts – Dual Decoder / Controller PCB
Mouser substitute Relays for 2×6 & 2×8
FreqEZ by K8UT
FreqEZ v2.2.0 Windows Console – to be installed on each computer accessing the FreqEZ

Standard Windows setup program:
Download and unzip this ZIP archive. Then run the setup executable:

FreqEZ Windows Console: FreqEZ WinConsole_v2.2.0.zip

FreqEZ v2.2.0 Raspberry Pi Controller – to be installed on the Raspberry Pi connected to the FreqEZ

Burn microSD Disk Method (RECOMMENDED):

  • A complete FreqEZ Controller software installation can be created using the Raspberry Pi organization’s Imager program ( https://www.raspberrypi.com/software/ ) to burn this image file to a microSD card. The resulting microSD will contain both the Raspbian operating system and pre-configured FreqEZ RPi software. When finished, just insert the microSD card into the RPI and apply power.
  • Step-by-step instructions can be found in the “Raspberry Pi Controller – Preparing the microSD Card” section of the documentation by clicking on Help in the v2.2.0 Windows Console or opening the on-line Help file FreqEZhelp.pdf.
  • FreqEZ Raspberry Pi O/S and program image file: FreqEZ_RPi_v220_ISO (DO NOT UNZIP)

Manual File Copy Method (ALTERNATE):

  • The files in this FreqEZ RPi Controller ZIP archive can be downloaded and manually copied to specific locations within the Raspberry Pi file structure.
  • Step-by-step instructions can be found in the “APPENDIX: Alternative Method for Preparing the microSD Card” section of the documentation by clicking on Help in the v2.2.0 Windows Console or opening the on-line Help file FreqEZhelp.pdf.
  • FreqEZ Raspberry Pi Controller: FreqEZ_RPiController_v2.2.0.zip
FreqEZ v2.2.0 Help PDF file

FreqEZ Documentation / Help file: FreqEZhelp.pdf